General Specifications
Bodies:
1. All cars must resemble full sized race cars with three numbers of reasonable size placed on the sides and top (or hood)
2. Each car will be equipped with a scale three-dimensional detailed driver and interior.
3. All cars must be painted so that the chassis is not visible when viewed from above and to the sides. A clear strip is allowed to separate the built in wing from the body.
4. Front and rear wheel wells must be left clear or be cut out.
5. Only those bodies specified for the class can be used.
Motors:
1. Motor can be notched for axle clearance.
Width:
1. Unless otherwise noted, no car may exceed 3.25 inches in width excluding body pins.
Clearance:
1. Unless otherwise noted, gear must be level with or above the bottom of the chassis.
Wheels:
1. All tires must be black in color.
Guide:
1. All classes may use only one guide flag.
Wires:
1. All classes may use “earring clips” to secure lead wires.
Gears:
1. Unless otherwise noted, there are no restrictions on type, pitch or gear ratio.
